| Power Supply Requirement |
Input Voltages 90V - 264VAC 50/60Hz, maximum power 60W connected via a standard IEC connector located on the rear panel.
The power input socket contains a fuse which should only be replaced with the same type and rating for continued product safety. The correct type and rating of fuse is stated on a label on the side of the equipment. |
| Input |
| Video Inputs |
Signal formats |
Composite (CVBS), S-Video (Y/C), Component (RGB and YPbPr 525i and 625i) SDI 525i and 625i. |
| Video Colour Standards Composite (CVBS) Luminance (Y) input level
Chrominance (C) input level |
NTSC, PAL, SECAM.Input level 1V p-p nominal inc. sync.1V p-p nominal inc. sync. 0.6V p-p nominal. |
| Component Video Input |
This may be RGB + sync, YPbPr +sync, RGB with sync-on-green or
YPbPr with sync-on-Y. |
| Note: The S-input on this channel provides the genlock sync input for models fitted with the optional Genlock module. |
| SDI Input |
Format |
Serial video data in SMPTE 270Mb/s format. |
Computer
(VGA and
DVI-D)
Inputs and connections
|
Signal formats: |
DOS 720 x 400 70Hz.
VGA 640 x 480 50Hz to 75Hz inclusive.
SVGA 800 x 600 50Hz to 75Hz inclusive.
XGA 1024 x 768 50Hz to 75Hz inclusive.
SXGA 1280 x 1024 50Hz to 75Hz inclusive. |
| RGB video level |
0.7V - 1.0V. |
| Sync formats |
Separate H & V sync at TTL levels. |
| The VGA and DVI-D inputs conform to the VESA standard pin outs for these signal types. |
| Input Impedance (all inputs) |
75 Ohms. |
| Output |
| Display Output |
Two output connectors are provided which are useable simultaneously. One is a DVI-D output and the other is a VGA style output. Both conform to normal VESA standards for connectors and pin outs for these signal types. The internal image processing format can be optimized for either DVI-D or VGA outputs, however
both may be used, whichever has been selected as the preferred output type. |
| * Specifications are subject to change without notice. |
" 
